hoset might be he531ve

Discussion of Variable Geometry Turbos, VGT, VTG, VNT
Post Reply
65fpvmustang
Posts: 3
Joined: April 18th, 2013, 7:38 pm
What do you drive: falcon ranchero

hoset might be he531ve

Post by 65fpvmustang » October 19th, 2013, 10:59 pm

Holset supposed to be a he531ve.
73.6mm inducer 105.8mm exducer
turbin inducer 85.3mm 80mm exducer

oil feed and drain are on the same side. no coolant in the electric actuator.

I'm currently running a he351 on a 2.3 lima vgt controlled by two springs.
currently adding pneumatic cylinder and solenoid for ms3 to fine tune vgt by throttle position and rpm.


I'm having problems attaching pics.

User avatar
Aero
Admin
Posts: 811
Joined: December 13th, 2008, 2:22 pm
What do you drive: 95 TSI AWD

Re: hoset might be he531ve

Post by Aero » November 9th, 2013, 9:36 am

65fpvmustang wrote:Holset supposed to be a he531ve.
73.6mm inducer 105.8mm exducer
turbin inducer 85.3mm 80mm exducer

oil feed and drain are on the same side. no coolant in the electric actuator.

I'm currently running a he351 on a 2.3 lima vgt controlled by two springs.
currently adding pneumatic cylinder and solenoid for ms3 to fine tune vgt by throttle position and rpm.


I'm having problems attaching pics.
The best thing is to upload your pictures to photobucket, or something similar then link them here. I had to limit photo size here or it caused issues.
Image

Self Cooling Intercooler
Is there such a thing? What I am thinking of is something like like air/water intercooler but instead of water passing thru it, the turbo sucks air thru it, then feeds the charge thru the side where it normally would on an air water intercooler. Thus cooling itself
FAIL

65fpvmustang
Posts: 3
Joined: April 18th, 2013, 7:38 pm
What do you drive: falcon ranchero

Re: hoset might be he531ve

Post by 65fpvmustang » November 9th, 2013, 1:03 pm

Large holset next to he351

Image

Image

Image

Image

Image

Image
Image


Image
Image
Image

Post Reply