| It is currently September 3rd, 2010, 5:33 pm |
|
All times are UTC - 6 hours [ DST ] |
 
|
Page 1 of 2 |
[ 31 posts ] | Go to page 1, 2 Next |
| Print view | Previous topic | Next topic |
Holset HE551V VGT Turbo Information
| Author | Message |
|---|---|
|
Admin  Joined: December 13th, 2008, 2:22 pm Posts: 694 
|
 Holset HE551V VGT Turbo InformationJust won this one on ebay. HE551V. For diesels up to 16l and Holset rates the HE500 series for 295-650hp. Those are diesel numbers of course. Probably closer to 900 or 1000 on a gasoline engine. I'm expecting samewhere around a 67mm compressor wheel.
http://cgi.ebay.com/ebaymotors/ws/eBayI ... &viewitem= It will be going on one of our combines at home as another VGT experiment. I'll be measuring all the wheels and VGT nozzle area to include it in the VGT info on here when it comes.    Took it apart today and took some measurements and more pictures. It is one big SOB.  Wheel measurements. Compressor Inducer 71.75mm Exducer 108.1mm Turbine Inducer 86mm Exducer 75mm From some clay and my calculations the VGT has an operating range of approximately 9cm^2 - 31cm^2 The compressor is a machined wheel that looks like what people refer to as a "billet" machined wheel. I stupidly forgot to try and determine whether it is aluminum or titanium. The backing plate was a bit rusty, otherwise the thing looks like its in great shape with normal shaft play.      Here as a size comparison to the HE351VE turbo I have on my car, the one most people think is big.     VGT fully open  VGT fully closed  _________________  Self Cooling Intercooler Quote: Is there such a thing? What I am thinking of is something like like air/water intercooler but instead of water passing thru it, the turbo sucks air thru it, then feeds the charge thru the side where it normally would on an air water intercooler. Thus cooling itself FAIL |
| January 25th, 2009, 10:26 pm |
|
|
|
|
Admin  Joined: January 10th, 2009, 10:47 pm Posts: 287
|
Re: New toy. Holset HE551V VGT turbo information to come later. How much do they normally go for?
_________________  749 Brigade 1989 Mazda RX-7 Turbo 2003 Yamaha YZF-R6 "If drinking gave you horsepower, I'd be going right now" - Dan, a very drunk Dan |
| January 26th, 2009, 1:00 am |
|
|
|
|
Admin Joined: December 13th, 2008, 2:22 pm Posts: 694
|
Re: New toy. Holset HE551V VGT turbo information to come later. Most of the ones that are unused on ebay are listed for 1000-1200 or so. Retail is WAY over that somewhere.
_________________ Self Cooling Intercooler Quote: Is there such a thing? What I am thinking of is something like like air/water intercooler but instead of water passing thru it, the turbo sucks air thru it, then feeds the charge thru the side where it normally would on an air water intercooler. Thus cooling itself FAIL |
| January 26th, 2009, 1:45 am |
|
|
|
|
Admin Joined: January 10th, 2009, 10:47 pm Posts: 287
|
Re: New toy. Holset HE551V VGT turbo information to come later. How many hours is this one supposed to have on it?
_________________ 749 Brigade 1989 Mazda RX-7 Turbo 2003 Yamaha YZF-R6 "If drinking gave you horsepower, I'd be going right now" - Dan, a very drunk Dan |
| January 26th, 2009, 1:49 am |
|
|
|
|
Admin Joined: December 13th, 2008, 2:22 pm Posts: 694
|
Re: New toy. Holset HE551V VGT turbo information to come later. There isn't any way of knowing really.
Only thing I have to go off of is it says no real shaft play. They tend to last far a very long time. Other than the one that I had die from metal contaminated oil, none of the equipment we have had has died. _________________ Self Cooling Intercooler Quote: Is there such a thing? What I am thinking of is something like like air/water intercooler but instead of water passing thru it, the turbo sucks air thru it, then feeds the charge thru the side where it normally would on an air water intercooler. Thus cooling itself FAIL |
| January 26th, 2009, 2:02 am |
|
|
|
|
Admin Joined: December 13th, 2008, 2:22 pm Posts: 694
|
Re: New toy. Holset HE551V VGT turbo information to come later. It came today.
Its HUGE. I don't have my calipers here to get any measurements yet, here are some pictures with a beer can for reference.   _________________ Self Cooling Intercooler Quote: Is there such a thing? What I am thinking of is something like like air/water intercooler but instead of water passing thru it, the turbo sucks air thru it, then feeds the charge thru the side where it normally would on an air water intercooler. Thus cooling itself FAIL |
| February 5th, 2009, 1:12 am |
|
|
|
 Joined: January 10th, 2009, 11:33 pm Posts: 97 Location: Salina
|
Re: New toy. Holset HE551V VGT turbo information to come later. Awwww sexy!
_________________ I love diesel smoke 
|
| February 5th, 2009, 7:45 am |
|
|
|
 Joined: January 12th, 2009, 9:20 am Posts: 113 Location: Bismarck, ND
|
Re: New toy. Holset HE551V VGT turbo information to come later. You, sir, are fucking nuts. Hotrodding a combine.
 My hat is off!_________________ BOOST=My favorite drug.   
|
| February 5th, 2009, 1:30 pm |
|
|
|
|
Admin Joined: January 10th, 2009, 10:47 pm Posts: 287
|
Re: New toy. Holset HE551V VGT turbo information to come later. That's one big bitch
_________________ 749 Brigade 1989 Mazda RX-7 Turbo 2003 Yamaha YZF-R6 "If drinking gave you horsepower, I'd be going right now" - Dan, a very drunk Dan |
| February 5th, 2009, 7:05 pm |
|
|
|
|
Joined: January 11th, 2009, 10:08 pm Posts: 2
|
Re: New toy. Holset HE551V VGT turbo information to come later. that turbo is just beyond normal lol. what is the range of a/r on the 500 series???. and also how much does that one weigh. the 351 we have is a heavy weight around 50lbs, but that one must be a monster hehehe.
|
| February 6th, 2009, 2:01 pm |
|
|
|
|
Admin Joined: December 13th, 2008, 2:22 pm Posts: 694
|
Re: New toy. Holset HE551V VGT turbo information to come later. Its marked as a 31cm housing, which would be the maximum size. I haven't had a chance to measure the minimum yet. It is a heavy SOB, the shipping weight on the UPS label is 69lbs. I haven't had a chance to weigh it yet either myself.
_________________ Self Cooling Intercooler Quote: Is there such a thing? What I am thinking of is something like like air/water intercooler but instead of water passing thru it, the turbo sucks air thru it, then feeds the charge thru the side where it normally would on an air water intercooler. Thus cooling itself FAIL |
| February 6th, 2009, 5:01 pm |
|
|
|
|
Admin Joined: December 13th, 2008, 2:22 pm Posts: 694
|
Re: New toy. Holset HE551V VGT turbo information to come later. First post updated with lots of pictures and measurements.
 _________________ Self Cooling Intercooler Quote: Is there such a thing? What I am thinking of is something like like air/water intercooler but instead of water passing thru it, the turbo sucks air thru it, then feeds the charge thru the side where it normally would on an air water intercooler. Thus cooling itself FAIL |
| February 8th, 2009, 9:48 pm |
|
|
|
|
Joined: January 12th, 2009, 1:08 am Posts: 609
|
Re: New toy. Holset HE551V VGT turbo information to come later. That beer is still full you need to get to drinking son.
 |
| February 8th, 2009, 10:29 pm |
|
|
|
|
Joined: January 12th, 2009, 9:22 pm Posts: 6
|
Re: Holset HE551V VGT Turbo Information Jeeze man. Ok, now here's the fun part, have you seen/gotten the compressor map yet on this from Holset? I know we had some luck lobbying them over on TurboFord on the HE431, I would love to see the 351, 431, and 551 on top of one another...
|
| February 18th, 2009, 6:34 pm |
|
|
|
|
Admin Joined: December 13th, 2008, 2:22 pm Posts: 694
|
Re: Holset HE551V VGT Turbo Information I don't have time right now to post them and I need to call my dad again to verify, but I do have some results/impressions of it. He got it mounted a few days ago. Lets say he is pretty happy so far.
_________________ Self Cooling Intercooler Quote: Is there such a thing? What I am thinking of is something like like air/water intercooler but instead of water passing thru it, the turbo sucks air thru it, then feeds the charge thru the side where it normally would on an air water intercooler. Thus cooling itself FAIL |
| February 19th, 2009, 1:19 am |
|
|
|
|
Admin Joined: December 13th, 2008, 2:22 pm Posts: 694
|
Re: Holset HE551V VGT Turbo Information The adapter is ugly, but it works and is strong. He had to raise the hood on the combine by a few inches due to the adapter height, and the large size of the turbo.
     _________________ Self Cooling Intercooler Quote: Is there such a thing? What I am thinking of is something like like air/water intercooler but instead of water passing thru it, the turbo sucks air thru it, then feeds the charge thru the side where it normally would on an air water intercooler. Thus cooling itself FAIL |
| March 30th, 2009, 1:46 pm |
|
|
|
 Joined: April 16th, 2009, 7:21 am Posts: 76
|
Re: Holset HE551V VGT Turbo Information are you bidding on the other one on ebay?
  _________________ My page.................................. myspace.com/r3n0v4d0 
|
| April 18th, 2009, 2:41 am |
|
|
|
|
Admin Joined: December 13th, 2008, 2:22 pm Posts: 694
|
Re: Holset HE551V VGT Turbo Information RenoVado wrote: are you bidding on the other one on ebay? I'm watching it, but not bidding haha. I don't have anything to put it on now. There is a VGT on two of my parents combines now, a HE431V and a HE551V.  _________________ Self Cooling Intercooler Quote: Is there such a thing? What I am thinking of is something like like air/water intercooler but instead of water passing thru it, the turbo sucks air thru it, then feeds the charge thru the side where it normally would on an air water intercooler. Thus cooling itself FAIL |
| April 18th, 2009, 4:16 am |
|
|
|
|
Joined: April 16th, 2009, 7:21 am Posts: 76
|
Re: Holset HE551V VGT Turbo Information what about your car
 or just to buy :P _________________ My page.................................. myspace.com/r3n0v4d0
|
| April 18th, 2009, 4:56 am |
|
|
|
|
Joined: April 18th, 2009, 5:28 pm Posts: 3
|
Re: Holset HE551V VGT Turbo Information I am curious what the green wire is coming from the CHRA and what its purpose is?
I have just bought a large VGT Holset on ebay but not sure what model (ID plate missing). I will measure it up when I recieve it. Thanks. |
| April 18th, 2009, 6:44 pm |
|
|
|
|
|
Page 1 of 2 |
[ 31 posts ] | Go to page 1, 2 Next |
|
All times are UTC - 6 hours [ DST ] |
Who is online |
Users browsing this forum: No registered users and 1 guest |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |